Menu / Price List

---

• Includes ThunderMax ECM with Auto-Tune Module, plug-in harness and two wide-band sensors, TMax software and communication USB cable, Quick-Start Easy Install and Comprehensive User's Manual, technical support and free software and updates
• Hundreds of maps available to download for your bike (based on model, engine size, exhaust system air cleaner, pistons, cams, etc.) - load the map of your choice and the integral auto-tune will do the rest
• Software program allows live monitoring, recording and e

  Features

• Portable 12V compressor measures only 4" x 2" x 6" (EU: 10.16 cm x 5.09 cm x 15.25 cm) and weighs just 14 oz. (EU: 397 gram)
• Features a built-in LED light and 0-120 psi gauge (EU: 8.27 bar)
• 4" tire valve hose (EU: 10.16 cm); 66" power cord (EU: 1.67 meter)
• 12" extension alligator clips (EU: 30.5 cm); 36" extension lighter adapter (EU: 0.91 meter)
• Includes sports needle adapter, inflatable adapter, complete instructions and rugged zippered carry case

 PLEASE NOTE THEUNIT HAS A 0-50 PSI GAUGE

 FW1 Waterless Wash and Wax is a superior product which can be used on cars, RVs, boats, personal watercraft, motorcycles, airplanes, trucks, bicycles and even the kitchen sink... 

• Clamps to the handlebar or the clutch/brake perch and holds an average-size cup, can, bottle or mug
• Quick-detach mount leaves a simple clamp when not in use
• Clamp allows beverage to swivel when needed
• Stainless steel mug with mounting ring this item

Tri-chromed stud screws into the unused 10 mm mirror mounting hole on most motorcycles.

A convenient piece helps to temporarily hang the helmet or other items when the bike is parked. 2 inches in length.

Fits the GL1100 and GL1200.

• Replaces 6mm Right Standard Thread
• Includes One Holder Stud, One Padlock and Two Keys
• Works for Either Brake or Clutch Pin Replacement
• 6mm Standard Right Threaded

• Quick and simple ambidextrous design lets you just flip the lever to lock smartphone into the secure rubber molded fingers
• Infinite adjustment with Ciro ball-mount design
• Intuitive ball mounting system allows for a broad range of angle adjustment
• Fit devices from 2 1/8" - 3 1/2" wide

• Ambidextrous design
• One-time adjustment for your phone or GPS
• Infinite adjustment with Ciro ball mount design 
• Intuitive ball mounting system allows for a broad range of angle adjustment
• Fits devices from 2 1/8" to 3 1/2" wide

This accent is made of tri-chromed ABS and covers the lip that runs along the outside front fairing under the headlights. These small chrome accents adds definition to this area of the bike and compliments other chrome pieces nicely. Easy to install with double sided tape. Fits the Goldwing GL1800 12-15. Pair. 

This popular ABS tri chromed accent is a great way to add a touch of chrome to the windshield. This trim outlines the windshield vent and very easily attaches with self adhesive tape. Fits the GL1800 04-17. Single. 

Fits GL1100 80-87

This tri-chromed front mirror trim fits the outer edges of the rear view mirror adding a nice contrast with the painted mirrors. Easy to install with self-adhesive tape. Fits the GL1800 01-17 and F6B. Pair. 

This Digital Volt Meter offers voltage monitoring from 11 to 16 volts with thermometer, ice alert, clock, stop watch and lap counter.

DIGITAL VOLT METER 5 IN 1, Clock, Ice Alert, Thermometer, Stop Watch 12 Volt, Attaches with Hook & Loop 

These License Plate Trims are built using durable chromed ABS for a high luster. For standard 4" by 7" motorcycle plates. 

This Right Side Chrome Billet Aluminum Axle Cap is a great improvement over the factory unfinished nut. Fits Honda GL1500 Valkyrie, GL1800, VT1300, VTX1300 and VTX1800 Retro and Standards. Held on with set screw provided. SoldIndividually. 

These sleek and sporty chromed ABS Caliper Covers match the front contour of the OEM covers and offer a clean look. Mounts with hardware provided. Fits GL1800 2001-2017 non airbag. 

• Mounts on the Left Side
• Mounting Hardware Included
• Fits Honda Valkyrie VF750, VT600, VT750, Ace, Spirit, R/S
• Compatible with vehicle type: street-cruiser-motorcycles

• Fits Honda Valkyrie, VF750, VT600, and VT1100
• Mounts on the Left Side
• Mounting Hardware Included
• Teardrop Design

These chromed ABS Air Vents replace the stock OEM black vents. The air vents are easy to adjust and easily snap into place. Fits Honda GL1800 2001-2010. 

This Contour Series speaker trim delivers stylish curves and a flare of elegance to enhance the classicstyle of the Honda GL1800 Gold Wing. These new front speaker accents capture the Contour Series design while molding to the curves of the existing OEM speakers. Simple installation, brilliant chrome plated ABS and seamless lines gives these speakeraccents a step above the rest at a great value. Fits Honda GL1800 2006-2013.

FRONT SPEAKER ACCENTS, For Honda GL1800 2006-10, 2012-

This three dimensional trim adds the illusion of speed and reflects light for sparkle 

& depth not possible with ordinary paint accents. Easy installation with high-strength adhesive.

Gold Wing: '01-'10 GL1800 Models (except Airbag Models)

• Similar in design to upper fairing intake vents
• Fit into air intake openings
• Install with double-sided tape

Side Cover Accents by Add On Accessories®, 1 Pair. These tri-chromed ABS accent pieces are made to fit around the "Gold Wing™" emblem. They are a great chrome addition to the side of the bike, being beautiful as well as practical, or they can help protect or cover the side from damages or scratches. Easy to install with self-adhesive tape. 

This tri-chromed plated steel accent with cutouts fits over the radio control panel adding a nice touch of chrome. Easy to install with self adhesive tape. Fits the GL1800 01-10. Single. 

These tri-chromed ABS grills are perfectly contoured to fit the outline of the front speakers and have a single bar across the center. Easy to install with self-adhesive tape. Fits the GL1800 01-05. Pair. 

These tri-chromed ABS grills are flat and contoured to fit the outline of the rear speakers with a single bar across the middle. Easy to install with self-adhesive tape. Fits the GL1800 01-05. Pair. 

These chrome ABS dash door accents add a great look and make the dash doors pop against the black material of the bike. The set includes a right and left chrome trim which outlines the dash doors and a chrome accent to cover the latch on the clutch side door of the bike. They are easy to install using the silicone which is included. Fits the Goldwing GL1800 12 & Up. Pair.  

•  Chrome accent designed to go over stock emblem
• Creates a unique style while accentuating the lines of the upper fairing
• Simple peel-and-stick installation

• Transform the black fairing air inlets into a chrome highlight
• Easy installation, just peel and stick

These Show Chrome finish Free Spirit raised eagle master cylinder covers are a great finishing touch to set off those handlebars. Fit Honda Valkyrie, VF750, VT600, VT750, VT1100, VT1300 Fury, Interstate, Stateline, Sabre, VTX1800, Yamaha Roadstars, and Royal Stars. 

Tri-chromed reservoir covers are beautiful and add a great touch of chrome to the dash area of the bike. This cover is embossed with a gold flying eagle with the words "free spirit" and includes chrome screws. Fits the GL1500 and GL1800. Single. 

These die-cast aluminum master cylinder covers are a great finishing touch for your handlebars. Includes a pair of cylinder covers and required hardware. Fits Honda Valkyrie, VT1100 1987-1996, VT1300 Fury, Interstate, Stateline, Sabre, VTX1800,and Yamaha Royal Stars. 

•  Fits the GL1500 and GL1800.
• Tri-chromed ABS plugs.
• Covers the screw holes on the handlebar.
• Easy to install by snapping in place.
• Sold in pairs. 

These Chromed ABS Mirror Back Trim from Show Chrome Accessories® add a bright chrome trim to the mirrorback and front turn signals. The trim matches Show Chrome Accessories® Trunk and Saddlebag Light Grilles (52-744, 52-745, 52-774, & 52-775). Fits Honda GL1800 2001-2013(not F6B). 

These chrome ABS radio knobs are a complete replacement for the OEM black ones on the bike. They have a raised eagle on each to make them unique and the chrome adds a nice touch to the inside fairing on the bike. Fits the GL1800 12-17 and F6B. Pair. 

This custom designed lower wind deflector is contoured to minimize the wind flow close to the rider, butcan be easily pivoted to direct air in front of the rider as well. The deflector mounts with provided die-cast mounting brackets. No drilling is required. Fits Honda GL1800 2001-2010 

This custom designed upper wind deflector incorporates its own movable vent panel that can direct wind into the rider pocket. These upper panels dramatically widen the air protection pocket by approximately 4" on each side. No drill installation. 

 This custom designed upper wind deflector incorporates its own movable vent panel that can direct wind into the rider pocket. These upper panels dramatically widen the air protection pocket by approximately 4" on each side. No drill installation.  For GL1800 Goldwing 2001-17 

• Omni Levers feel as good as they look
• The ergonomic design is precisely contoured and angled to deliver comfortable, controlled actuation of the clutch or front brake
• Sleek, angular design to complement the lines of the bike
• Ergonomic feel for comfortable, effortless pullback
• Does NOT retain adjustability of the OEM levers
• Made from quality aluminum

These Smooth Blade Levers replace the brake and clutch OEM levers.  

This Smooth Blade Clutch lever replaces the OEM 53178-MN5-006. Fits Honda GL1500/6 1985-2000.

SMOOTH BLADE CLUTCH LEVER, For Goldwing 85-00

Goldwing Soft Foam Grips With Chrome Eagle Ends
By Emgo. Classic grips with soft black foam with chrome end caps embossed with a chrome eagle emblem and red "Roadhawk".

A great economical set of grips. Fits any 150 mm x ⅞ inch bar.

Fits all Goldwings.

Pair.

Comfort Grips are easy to install, with CNC finish for extreme durability and chrome plated for a first class look. These vibration dampening grips are ergonomically designed with a convex profile to fit the cup of your hand. The symmetrical rubber pattern provides you with total grip comfort, reduces numbness, vibration and wrist fatigue in any position on the grip. Comfort Grips are easy to install and utilize OEM throttle tubes and OEM controller. Heated Grips draw 2.7 - 3.2 amps on high. For

This chrome damper replaces the black one on the bike giving the bike an extra chrome accent which pairs up nicely with chrome grips for a classy look. Fits GL1800 and F6B. Pairs. 

• Finishes the opening when you remove the OEM engine guard cover
• Ideal for mounting highway boards that attach to case guard
• Easily snaps into place
• Polypropylene construction with black matte finish

A pair of chromed ABS Radiator Grilles instantly dresses up the side radiator. The Show ChromeAccessories® unique diamond pattern complements the features of the bike and replaces the stock OEM black plastic. Fits Honda GL1800 2006-2010.

RADIATOR GRILLES, ABS Chrome, For GL1800 2006-2010

• Design incorporates a subtle scale mesh design
• Beautiful chrome finish
• Really dresses up the stock black plastic grates
• Sold in pairs

This Slider Peg kit comes with a pair of stem mounts and our popular Dot style pegs. Fits GL1500 Gold WingI/A/SE 1988-2000 (Driver), Valkyrie 1999-2002 (Driver), VF750 Magna 1982-2002 (Driver), VT750 Ace 2000-2002 (Driver), VT750 Phantom/RS, VT1100 ACE (Driver), and VTX1800 C/F (Driver). 

 This Slider Peg kit comes with a pair of stem mounts and our popular Dot style pegs. Fits GL1800 Gold Wing(Driver), VL800 2001-2004 (Driver), and M50 2005-2006 (Driver).    

The CNC Chrome Driver Peg Mount Bracket replaces the dull OEM mount bracket for even more customizationand style. This mount also works with the Driver Peg Lowering Bracket (21-520). Fits the Honda GL1800 2001-2013.     

Happy passengers need happy feet, so give your passenger the gift that will provide smiles for miles. These sleek yet durable mounts are just the ticket for creating an oasis of passenger comfort. Position the cruise pegs forward and out for a variety of foot placement options and a dream ride. Bolting directly to the factory floorboard mounts these cleverly designed cruise pegs also pivot out of the way when not in use ensuring no interference with the riders' legs. Gold Wing 01-'17 GL1800 Mode

• Billet aluminum riser shims adjusts 7/8" forward 3/4" up or 7/8" back and 3/4" from stock position
• Mount between handlebars and forks  

These billet aluminum Handlebar Riser Shims mount between the handlebars and the forks to raise the handlebars about 1-1/2" at the grip end.

HANDLEBAR RISER SHIMS, Billet , Raises Bar About 1 1/2" at Grip, For GL1800 Goldwing 2001-17 

Many of today's tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48895 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. This converter is compatible with vehicles equipped with either incandescent or LED taillights and includes a built-in 4 flat connector.  

The 47115 provides 48 inches of extension length to provide extra reach where needed. This item can be used as an extension or cut in half to use as separate vehicle and trailer connectors. Package includes a dust cover to protect exposed terminals, cable ties to mount the harness out of harms' way and di-electric terminal grease for applying to the metal terminals to protect from corrosion. 

• Complete assemblies.
• Colour-coded for easy installation.
• Molded weather-resistant PVC bodies for all-round protection and durability.
• Polarized for proper mating of circuits.
• Terminals are precision aligned for maximum current carrying capacity and ease of connecting and disconnecting.
• For cars, trucks, trailers, boats, RVs.

• This trailer wire harness isolates the load between the motorcycle and trailer through four 10-amp relays to prevent electrical feedback
• The heavy-duty circuit board can handle a continuous 16-amp steady load, and further isolation is provided with a separate 15-amp inline fuse for additional protection
• Plugs into existing wire harness, no splicing required
• Works with 5-pin trailer connector (not included)

• Provides plug connection between motorcycle wire harness and optional isolator and/or trailer plug (sold separately)
• Plugs directly into your factory tail light harness
• No damage to your factory wiring
• No soldering
• No splicing

For Clutch Reservior Fits Honda GL1800, GL1500, VTX1800, VTX1300,VT1100 87-96, Yahmaha Royal Star 

• Prevents electrical malfunctions or damage to the bike's electronic ignition, fuel injection, ABS braking systems and other sensitive electrical components
•  NOTE:   WILL NOT function correctly on 2014 and newer Harley Davidson’s when set on the 4 to 5 wire mode. ON these HD models you will also need  # HD007-50 4 to 5 wire decoder. On Indian Models it also requires the use of CANBUS module #VCC007-50. 
•  NOTE : This Isolator WILL NOT work on 2018 and newer Honda Gold Wing and some other newer model

Add a little chrome to your carburetors with Show Chrome Accessories® Carb Covers foryour Honda Valkyrie.

CARBURETOR COVERS, Set of 6, Fits Honda Valkyrie

This attractive chrome two piece set replaces the stock OEM communication cord holders. Fits GL1500/GL1800Passenger.

CORD CLIP - CHROME, Fits Honda GL1500/6 1988-2000

•  This two piece set securely holds the helmet pigtail cord and prevents it from dangling loosely
• Universal Applications
  Ideal communication cord holder when not connected to your helmet
• Securely holds the helmet pigtail cord and prevents it from dangling loosely
• Sold in pairs

 Keep dirt and debris from damaging the front of your engine with the Goldstrike Front Fender Extension. Styled to match the original fender materials and texture, this gets the job done without becoming an eyesore. Includes easy to use drilling template for fool proof installation. 

Tie-Down brackets for the 2018-up Gold Wing, give you a secure, easy-to-access location in which to strap down the front of your motorcycle during trailer transport or service. Powdercoated black to blend in with the motorcycle, but easy to find when needed. Don't risk breaking your handlebars or upper triple tree by strapping your bike down by the handlebars.   

A one-handed chrome plated intercom cord holder to firmly hold the headset cord plug.

EASY-CLIP CORD HOLDER, Easier One Handed Use, Fits GL1800, GL1500, 1200, etc.

 This zinc plated 1⁄2" hitch pin will fit the standard 1-1⁄4" receiver hitch used on today’s motorcycles. 

This 1?2 Dead Bolt Hitch Lock provide extra security for trailers. Comes with its own pair of keys forquick unlocking.  

DEAD BOLT HITCH LOCK, 1/2 Hitch Pin, For 1 1/4 x 1 1/4 Receivers 

Tri-chromed trailer ball cover fits over a 1 ⅞ to 2 inch trailer ball and includes a foam insert to hold the cover in place. The cover is great for preventing the ball from rusting or covering the ball when it gets greasy, thereby, helping to keep you and everything else clean. Single. 

•  Plug-in that allows trailer wiring and relay kits to power trailers with a four-wire harness (run/left turn/brake, right turn/brake and ground)
• Fifth bonus wire is available
• Includes 4-pin flat vehicle connector

19 amber LEDs are included in this stunning accent for the Honda GL1800 Gold Wing. Lights can be used asadded turn signals or running lights. Amber Opera Lights attach to the cylinder head with double sided tape. Plugs into existing wire harness, no splicing required.

MARTINI OPERA LIGHT SET, For Cylinder Head 38 Amber LED's, For GL1800 Goldwing 2001-2005

Beautiful side lights contain 18 amber LED lights covered with a clear lens and encased in a chrome housing. They mount above the valve covers adding extra lighting to the side of the bike. Can be used as a running and turnsignal light. Fits the GL1800 01-10. Pair. 

• This pair of ABS chrome trimmed amber lights attach to the bottom of the passenger board with provided screws
• All connectors provided to wire as running lights
• Mounts to O.E.M. boards or #41-7368 Chrome Passenger Floorboard Covers
• Fits Honda GL1800 Gold Wing 01-10, 2012

The perfect complement to Slider pegs - same great features, same great designs.
Bolt directly to OEM rear brake pedal. 

• Updated design has built-in dust covers and a wider base for a clean transition to the fender
• Firm, rigid design maintains adjustability for a perfect fit without preloading the fork assembly
• Not for use with airbag-equipped models.

SuperBrace's 2318 Fork Stabilizer is made specifically for Honda Goldwing 1800 (2001-2017 Non Air Bag).

SuperBrace is the leading motorcycle fork stabilizer. Our patented brace provides better stability,superior aerodynamics and a more streamlined look than other multi-piece braces on the market.

Big Bike Parts® has an all new Windshield Vent for the GL1800 Goldwing, for use on OEM windshields. 

Big Bike Parts® has an all new Windshield Vent for the GL1800 Goldwing, for use on OEM windshields. 

This bright chrome Free Spirit Air Cleaner Cover is made of chromed ABS and replaces the OEM cover. FitsHonda VT750 Aero, Phantom, R/S, and Spirit C2. 

• Kits include a pair of ISO® passenger floorboards and a cast bracket to connect the board to a Küryakyn splined adapter mount (sold separately)
• Designed for use on models with passenger pegs
• Not recommended for use on passenger peg mounts that attach to the motorcycle with only a single fastener

When the stock passenger floorboards are flipped into a stowed position, what greets your eyes is dull, dreary and gray. Jazz things up with Show Chrome floorboard covers! These chrome plated covers are an inexpensive way to dress up the bottom side of stock floorboards. They're easily to install--just mount them with the use of existing hardware. 

• Add shape and depth to GL1800 front fender while adding extra protection
• Install with two screws and included double-sided tape; requires two holes to be drilled. 

•  Angle Adjustable
• Model specific no-hassle installation, then on-off without tools
• A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged
• Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners
• Anchoring hardware is the same for all windshields and fairings for each bike
• Made in the U.S.A.

•  Add a subtle but noticeable splash of chrome
• Simple peel-and-stick application
• Sold in pairs

Enhance rear/side visibility while customizing your trunk with these great looking lighted accents featuring L.E.D. running lights & turn signals. Designed to work as a standalone unit on the first generation GL1800, these are also a great compliment to our Saddlebag Accent Swoops (P/N 3232)  Gold Wing: '06-'17 GL1800 Models (except F6B) .  Gold Wing Note: '06-'10 Models require P/N 3241 for plug-&-play installation. '12-'17 Models require P/N 3230 for plug-&-play installation. 

This Medallion Series™ Trunk Handle is designed with both comfort and style in mind. This excellent handleis made from die-cast chrome plated aluminum alloy and mounts with the four screws provided; drilling is required. Fits the Honda GL1800 2001-2013 (not F6B).

MEDALLION SERIES, Chrome Trunk Handle, For GL1800 Goldwing 2001-10, 2012-, Die-Cast

Description: This is a deluxe trunk handle. This chrome plated steel handle is made by Add-On and is designed to mount the rear of the trunk lid to create a convenient place to grab when opening or closing the trunk lid. It measures 17 1/2" wide and about 3" high with a 5" wide foam center section. It mounts to the trunk lid in four locations and includes all of the required screws and washers. It does not include any mounting instructions.

HOLDS UP TO 4 1/2" TO 8 1/8" PLATES

• These Saddlebag Scuff Pads will protect saddlebags from passenger footwear with a soft carbon fiber look.
• The inner piece measures 10" L x 2-1/2" W and the outer piece measures 9-1/2" L x 1-1/4" W.
• The pads come as a set of 4 pieces and attach with double sided tape provided.

These Trunk Lens Grilles are designed to match 2006 and newer Trunk Lights such as BBP #52-776 trunklight. Attaches with double sided tape provided. Fits Honda GL1800 2001-2013(not F6B).

TRUNK LENS GRILLES, ABS Chrome, For GL1800 BBP Style 2006 Light, Fits 52-776 Trunk Light

• Easy to install chrome accents really add flash to the front wheel
• Lightweight, no need to re-balance wheel after installation
• Sold as a set

This simple triangle design black accent will help protect the key lock area on the trunk from being scratched by the key. Included is an optional highly reflective insert to change the black area into a reflective one to add more visibility to the rear of the bike, even during daylight hours. Fits the GL1800 01-17. Single. 

• Fits Honda GL1500 1988-2000
• Chrome Plated Steel Accent
• Ideal for Trunk Key Access
• Secures With Durable Double Sided Tape

The tri-chromed ABS trunk handle comes with LED lights to add additional visibility to the rear of the bike. Contains 8 red LED lights encased in a chrome handle. The lights works as a running or brake light and requires drilling to install. Measures 9 ½ inches. Fits the GL1800 01-17. Single. 

• Super-bright LEDs that function as run-brake lights housed inside a beautiful chrome accent
• Fills a dull area on the underside of the trunk

This Contour Series speaker trim delivers stylish curves and a flare of elegance to enhance the classic style of the Honda GL1800 Gold Wing. These rear speaker accents capture the Contour Series design while molding to the curves of the existing OEM speakers. Simple installation, brilliant chrome plated ABS and seamless lines gives these speaker accents a step above the rest at a great value.